LVE Orion II technical guide: user manual and maintenance.

LVE Orion II: technical specifications

The LVE Orion II kit is a pod device with a built-in 1,500 mAh battery, a 0.69-inch OLED display, adjustable output from 5 to 40 W and USB-C charging (5 V/2 A).

The RoyalCig Orion II product listing refers to a 4.5 ml pod. The manufacturer manual specifies a 5 ml capacity or 2 ml for the TPD version, so capacity depends on the version sold. Approximate dimensions are 103 × 43 × 17.2 mm.

Which coils fit the Orion II?

LVE documents two mesh coils: 0.4 Ω (stated operating range 26–32 W) and 0.8 Ω (12–16 W). Always check the consumable marking and exact part number.

Do not confuse Orion II pods and coils with those from other Orion generations, including Orion DNA Go, Orion Q and Orion II Pro.

How to replace the coil

Switch off the device. Release the pod using the cartridge lock, then remove it. Pull out the used coil and firmly insert the replacement until seated correctly. Refit the pod.

If e-liquid remains in the tank, tilt it when replacing the coil to help prevent leakage. After the first fill with a new coil, wait five minutes before use.

How to fill the pod

Unscrew the filling cap on top of the pod, add liquid without overflowing and secure the cap carefully. An improperly closed cap may cause leaks.

Power controls and maintenance

Press the main button five times quickly to switch the Orion II on or off. Adjust output using the + and − buttons. Pressing the main button with + locks or unlocks the adjustment buttons.

Adjust the draw using the airflow ring. Keep contacts clean and dry, never immerse the device in water and do not dismantle its built-in battery.

Common error messages

“Check Atomizer” means the coil is not detected: with the device switched off, check that the coil is fitted correctly and the contacts are clean. “Low Battery” indicates the need to recharge. “Too Hot” indicates excessive temperature: stop using the device and allow it to cool.

Orion II LVE FAQ

What battery does the Orion II use? A built-in 1,500 mAh battery.

Which coils are documented by LVE? 0.4 Ω and 0.8 Ω mesh coils.

How long should you wait with a new coil? The manufacturer advises five minutes after filling.

Are Orion II Pro consumables identical? Do not assume compatibility: check the exact part number.

Official LVE manual (PDF)