- New
Coils Nautilus Mesh pack of 5 – Aspire
€13.30
VAT included
Find the flavors of your electronic cigarette with the resistance Nautilus Mesh Aspireproposed in box of 5.
Available in 0,3 Ω, 0,7 Ω and 1,0 Ω, they allow to choose between a tight MTL draw and a more aerial RDL vape.
Compatible in particular with cleaners Nautilus 3, Nautilus 3S, Nautilus 3SR and Nautilus WG II, they use Mesh technology that promotes uniform heating and good aroma restitution.
Choose your resistance: 0,3 Ω (23–28 W), 0,7 Ω Nautilus 2S Mesh (20–25 W) or 1,0 Ω (13–15 W).
Secure payment
Secure payment by bank card
Fast shipping
Fast order preparation and dispatch
RoyalCig customer service
Our team is here to help and advise you
Resistances Nautilus Mesh Aspire: precise flavors and a custom vape
The resistance Nautilus Mesh Aspire allow you to renew the performance of your compatible cleaner. Thanks to their Mesh technology, they promote a uniform heating of the e-liquid and regular restoration of flavours.
Available in0.3 ohm, 0.7 ohm and 1.0 ohm, these resistances are suitable for different vape styles, from indirect inhalation (Indirect Inhalation) to direct restrictive inhalation (RDL).
Each box contains5 resistances of the selected value.
Which resistance Nautilus Mesh choose?
Nautilus Mesh 0.3 ohm: a more generous RDL vape
The resistance Nautilus Mesh 0,3 Ωworks between23 and 28 watts. It is suitable for users looking for a more open draw and a larger steam production.
It is particularly suitable for restricted direct inhalation (RDL), with a sufficiently open airflow.
Nautilus 2S Mesh 0.7 ohm: balance between flavour and steam
The resistance Nautilus 2S Mesh 0,7 Ωis used between20 and 25 watts. It offers a compromise between aroma restitution, intensity and steam production.
It is suitable for an open or light RDL MTL draw, depending on the cleaner and airflow adjustment.
Nautilus Mesh 1.0 ohm: tighter MTL vape
The resistance Nautilus Mesh 1,0 Ωworks between13 and 15 watts. It is intended for indirect inhalation (ILD), with tighter circulation and generally more moderate e-liquid consumption.
It is an interesting choice for users who prefer flavours and a draw close to that of a traditional cigarette.
Compatibility of resistance Nautilus Mesh Aspire
The three variations presented are compatible with the following clearomisers:
- Aspire Nautilus 3
- Aspire Nautilus 3S
- Aspire Nautilus 3SR
- Aspire Nautilus 322
- Aspire Nautilus GT II
In particular, they may be used with the Kit Zelos M80 Aspire equipped with the Nautilus 3SR cleaner.
Attention:All Nautilus resistors are not compatible with all the old cleaners and kits in the range. Check the exact reference for your equipment before ordering, including 0,3 Ω versions.
What e-liquid use with Nautilus Mesh resistors?
A balanced e-liquid50/50 PG/VG is a versatile choice for these resistors.
For the lowest values, in particular 0,3 Ω, prefer a nicotine level adapted to a more abundant vapour. 1,0 Ω resistance is more suitable for a MTL vape with moderate consumption.
The choice of e-liquid also depends on the airflow setting, the power used and your preferences.
How to install and start a Nautilus Mesh resistance?
- Turn off your electronic cigarette.
- Remove used resistance by following the instructions of your cleaner.
- Place a few drops of e-liquid on the cotton visible from the new resistance.
- Install the new resistance correctly.
- Fill the tank and let it rest for about 10 minutes.
- Start at low power in the recommended range, then gradually increase.
Careful initiation reduces the risk of burning during the first puffs.
Technical specifications
- Manufacturer:Aspire
- Range:Nautilus Mesh / Nautilus 2S Mesh
- Technology:Mesh
- Available values:0,3 Ω / 0,7 Ω / 1,0 Ω
- Power 0,3 Ω:23 to 28 W
- Power 0,7 Ω:20 to 25 W
- Power 1,0 Ω:13 to 15 W
- Type of vape:MTL / RDL according to resistance
- Packaging:box of 5 resistors
FAQ – Resistances Nautilus Mesh Aspire
Which resistance Nautilus Mesh choose?
Choose the 1,0 Ω for a tight MTL draw at 13–15 W, the Nautilus 2S Mesh 0,7 Ω for a more open draw at 20–25 W or the 0,3 Ω for a RDL vape at 23–28 W.
Are these resistors compatible with the Zelos M80 Kit?
Yes. The Nautilus 3SR cleaner from Kit Zelos M80 Aspire accepts Nautilus Mesh 0,3 Ω and 1,0 Ω as well as Nautilus 2S Mesh 0,7 Ω.
Is the resistance Nautilus 0,7 Ω a Mesh resistance?
There are several versions in 0,7 Ω. The Nautilus 2S Mesh 0,7 Ω works between 20 and 25 W. It is different from the Nautilus 2 0,7 Ω classic, planned between 18 and 23 W.
How many resistances does a box contain?
Each box contains 5 Aspire resistors of the selected value.
When to replace a resistance Nautilus Mesh?
Replace it when the flavours become less clear, steam decreases or a burning taste appears. Its life span varies depending on the e-liquid, power and frequency of use.
Should we start a new Nautilus Mesh resistance?
Yes. Lightly soak the accessible cotton, install the resistance, fill the tank and wait about 10 minutes before vaping.
20 Items
Data sheet
- Type de produit
- Résistance
- Brand
- Aspire
- Type de vape
- MTL / RDL
- Technologie
- Mesh
- Conditionnement
- Pack de 5
- Compatibilité
- Nautilus 3, 3S, 3SR, GT II
- Valeur
- 0,3 Ω / 0,7 Ω / 1,0 Ω
PRODUITS RECOMMANDÉS
Comments (0)
No customer reviews for the moment.
Viewed products
Find the flavors of your electronic cigarette with the resistance Nautilus Mesh Aspireproposed in box of 5.
Available in 0,3 Ω, 0,7 Ω and 1,0 Ω, they allow to choose between a tight MTL draw and a more aerial RDL vape.
Compatible in particular with cleaners Nautilus 3, Nautilus 3S, Nautilus 3SR and Nautilus WG II, they use Mesh technology that promotes uniform heating and good aroma restitution.
Choose your resistance: 0,3 Ω (23–28 W), 0,7 Ω Nautilus 2S Mesh (20–25 W) or 1,0 Ω (13–15 W).