- New
Pack of 5 coils Z-Coil Innokin
€9.90
VAT included
The pack of 5 resistors Z-Coil Innokin allows to replace the used resistors of many cleaners and kits compatible with the Z-Coil range, including models Zenith and Zlide.
Available in several values, resistances Innokin Z-Coil allow you to choose between a tight draw in indirect inhalation (MTL) and a more aerial vape in direct inhalation restriction (RDL), depending on the model and equipment used.
Packaging: box of 5 resistances of the same value. Select your version before adding to the cart.
Secure payment
Secure payment by bank card
Fast shipping
Fast order preparation and dispatch
RoyalCig customer service
Our team is here to help and advise you
Pack of 5 resistors Z-Coil Innokin for Zenith and Zlide
The resistors Z-Coil Innokin are designed for electronic cigarettes and cleaners using the manufacturer's Z-Coil system. Also known as Zenith resistances, they allow to renew the heating element of your equipment in order to find a steam production and a restitution of the adapted flavors.
This pack of 5 resistors Z-Coil Innokin is a convenient solution to regularly maintain your cleaner or compatible kit.
Which resistance Z-Coil Innokin choose?
The Z-Coil range offers different resistance values and several heating technologies. The choice depends on the desired print, the power available on your electronic cigarette and your cleaner.
| Resistance | Indicative power | Type of vape |
|---|---|---|
| 0.3 ohm | 30 to 40 W | RDL, restrictive aerial drawing |
| 0,48 ohm Plex3D | 12 to 16 W | MTL |
| 0.5 ohm Plexus | 12 to 16 W | MTL |
| 0.6 ohm DuoPrime | 9 to 13 W | MTL |
| 0.8 ohm | 14 to 17 W | MTL |
| 1.0 ohm | 20 to 25 W | MTL / RDL |
| 1.2 ohm | 10 to 14 W | MTL |
| 1.6 ohm | 10 to 14 W | TPL tight |
The power ranges are indicative and may vary depending on the resistance generation. Always respect the range indicated on the resistance or its packaging.
Compatibility of resistance Z-Coil Innokin
Z-Coil resistors are compatible with many Innokin equipment, including:
- Clearomizer Innokin Zenith
- Innokin Zlide Clearomizer
- Clearomizer Innokin Zenith Pro
- Clearomizer Innokin Zenith II
- Innokin Zenith Minimal
- Kit Innokin Kroma-Z
- Some other Innokin kits using the Z-Coil system
Attention:mechanical compatibility does not guarantee that all values can be used on each device. Also check the available power and manufacturer's recommendations.
An MTL or RDL vape depending on resistance
Z-Coil resistors cover several inhalation styles.
Versions intended for indirect inhalation (MTL)generally favour tighter draw and moderate power. RDL versions are designed for more open circulation and steam production.
The result also depends on the airflow adjustment of your cleaner and the e-liquid used.
How to change Z-Coil Innokin resistance?
- Turn off your electronic cigarette and remove the cleaner if necessary.
- Remove the base of the container in accordance with the package leaflet.
- Gently remove used resistance.
- Start the new resistance with a few drops of e-liquid on the accessible cotton.
- Insert the new resistance while respecting its positioning.
- Close the tank and fill it with e-liquid.
- Wait about 10 minutes before first use.
- Start at low power, then gradually increase in the recommended range.
When to replace a Innokin resistance?
The life of a resistance depends on the frequency of use, power and composition of the e-liquid.
A decrease in flavours, a weaker steam production or the appearance of a burning taste may indicate that a replacement is necessary.
Contents of the pack
- 5 resistors Z-Coil Innokin
- Resistance value according to selected decline
- Product of the brand Innokin
FAQ – Z-Coil resistance Innokin
Are Z-Coil resistors compatible with Zlide Innokin?
Yes, the Zlide cleaner uses the Z-Coil range resistance. However, make sure that the recommended power for the selected resistance matches your battery or box.
What difference between Zenith resistance and Z-Coil?
Innokin has renamed its Zenith resistance to Z-Coil. This is the same family of resistances, proposed under an updated name.
How many resistances does a box contain?
Each box contains 5 Z-Coil Innokin resistors of the selected value.
What resistance Z-Coil choose for a tight draw?
The MTL versions, especially in 1.2 and 1.6 ohm, are generally suitable for tight circulation. The result also depends on the airflow of the cleaner.
Which resistance Z-Coil chooses for a more aerial vape?
The 0.3 ohm version is designed for restricted direct inhalation, with a recommended power of 30 to 40 W. Your device must be compatible with this power.
Should we start a new Z-Coil resistance?
Yes. The initiation allows the cotton to soak up e-liquid before heating and helps reduce the risk of burning taste.
When do I change my Z-Coil resistance?
Replace it when the flavours decrease, the steam becomes less satisfactory or a burning taste appears. Frequency depends on use and e-liquid.
10 Items
Data sheet
- Type de produit
- Résistance
- Brand
- Innokin
- Type de vape
- MTL / RDL selon modèle
- Conditionnement
- Pack de 5
- Valeur
- Selon déclinaison
- Remplacement
- Résistance interchangeable
PRODUITS RECOMMANDÉS
Comments (0)
No customer reviews for the moment.
Viewed products
The pack of 5 resistors Z-Coil Innokin allows to replace the used resistors of many cleaners and kits compatible with the Z-Coil range, including models Zenith and Zlide.
Available in several values, resistances Innokin Z-Coil allow you to choose between a tight draw in indirect inhalation (MTL) and a more aerial vape in direct inhalation restriction (RDL), depending on the model and equipment used.
Packaging: box of 5 resistances of the same value. Select your version before adding to the cart.